All Juggernaut USA skid plates are engineered for true bolt-on installation. No drilling, cutting, or welding is required. Most installations can be completed in 1-2 hours with basic hand tools.
If you're in the Denver, Colorado area, our expert technicians can install this product for you. Our shop installs these every day at competitive rates, backed by a lifetime warranty on labor. Schedule your installation or call (970) 341-4221.
| Brand | Juggernaut USA |
| Product Type | Utility |
| SKU | pm-fh |
| Weight | 55.0 lb |
| Warranty | Lifetime Warranty |
| Country of Origin | Made in USA (Colorado) |
| Installation | Bolt-on, no drilling required |
| Years | Vehicle | Drive | Engine |
|---|---|---|---|
| 2013–2026 | Ram ProMaster 1500 | FWD | 3.6L Gas |
| 2013–2026 | Ram ProMaster 2500 | FWD | 3.6L Gas |
| 2013–2026 | Ram ProMaster 3500 | FWD | 3.6L Gas |
Not sure about your vehicle? Use the fitment checker above — it verifies your exact year, drive, and engine.
VANS WITH ADAPTIVE CRUISE CONTROL MAY HAVE SENSOR INTERFERENCE
Enhance your van's versatility with our Ram Promaster Front Hitch, allowing you to easily mount bike racks, a spare tire carrier, and more to your vehicle's front. Designed to replace the factory crash bar, this front hitch maintains the same position to ensure the lower radiator remains unobstructed.
Constructed from 3/8" steel plate and 1/4" rectangular tube, our Ram Promaster front hitch is made and powder coated locally, ensuring durability and quality. With an easy bolt-on installation process, there's no need for drilling, although some trimming of the plastic near the license plate is required.
Boasting a 350lbs static load rating, this front hitch is perfect for accommodating your recreational and travel needs. Pair it with our Front Spare Tire Rack for an even more seamless and functional setup.
Key Features
Fits all 2014+ Ram Promasters and Fiat Ducatos!
✅ Will this fit your ProMaster?
Yes — this fits:
| Years | Make | Model |
| 2013–2026 | Ram | ProMaster 1500 |
| 2013–2026 | Ram | ProMaster 2500 |
| 2013–2026 | Ram | ProMaster 3500 |
🚚 Ships next business day.
Not sure it fits yours? Text your year + trim to (970) 341-4221 and we'll confirm before you buy.
All orders ship from our Colorado facility the next business day. Standard delivery takes 2-4 business days via UPS Ground.
We offer a 90-day return policy on all products in unused, original condition. To initiate a return, contact us at (970) 341-4221 or email us. Return shipping is the responsibility of the buyer unless the product is defective.
Every Juggernaut USA skid plate is covered by our lifetime warranty against manufacturing defects. Our warranty covers materials and workmanship for the life of the product.
| What matters underbody | Our 1/4″ 5052-H32 aluminum | Typical 3/16″ steel |
|---|---|---|
| Resistance to permanent bending | Higher — bend resistance rises with the square of thickness | Baseline |
| Weight | About half — easier on payload | Heavier — a full set can top 120 lb |
| Corrosion | Won't rust | Rusts where the coating chips |
| Surface hardness (drag over rock) | Softer — can gouge on granite | Harder — steel's real edge |
Thickness does more work than material name: resistance to permanent bending scales with the square of plate thickness, so 1/4″ 5052-H32 aluminum takes a bigger hit before it stays bent than the 3/16″ steel most kits run — at about half the weight, and it never rusts. Steel’s honest advantage is surface hardness: if your truck lives on rock ledges, steel gouges less. For most owners, the thicker aluminum wins the trade.
“The parts fit perfectly, reassemble and everything is perfect.Looks great.”
2" receiver might not be exactly perfectly vertical. Bike rack, when installed, lists to one side. (not hanging straight up and down- perpendicular) Maybe it's the Yakima rack? Maybe it's my eye?
Lots of parts to take off but the install was straight forward and seems to be holding up well so far.
The parts fit perfectly, reassemble and everything is perfect.Looks great.
Easy installation. 👍
Customers who bought this also added these
Common questions about our skid plates and armor
It's a 2" front receiver for bike racks, spare tire carriers, cargo trays, and more.
Fits all years of the Ram Promaster (and Fiat Ducato), plus RVs built on the Promaster chassis. For other brands and models not listed, contact us so we can confirm fitment.
It bolts on in place of the factory crash bar — no drilling — though it does require minor trimming of the front bumper plastic for the receiver to pass through.
350 lbs static load rating.
Yes — made and powder-coated locally in the USA, and backed by our lifetime warranty.
On vans with bumper-mounted adaptive cruise control, a small percentage of customers have experienced interference with the sensor.