All Juggernaut USA skid plates are engineered for true bolt-on installation. No drilling, cutting, or welding is required.
If you're in the Denver, Colorado area, our expert technicians can install this product for you. Our shop installs these every day at competitive rates, backed by a lifetime warranty on labor. Schedule your installation or call (970) 341-4221.
| Brand | Juggernaut USA |
| Product Type | Skid Plate |
| SKU | jg-chevy-sierra-trans |
| Material | 1/4-inch 5052-H32 Aluminum |
| Hardware | Grade 8 steel hardware (included) |
| Weight | 30.0 lb |
| Warranty | Lifetime Warranty |
| Country of Origin | Made in USA (Colorado) |
| Installation | Bolt-on, no drilling required |
| Years | Vehicle | Drive | Engine |
|---|---|---|---|
| 2019–2026 | Chevrolet Silverado 1500 | 4x2 | All |
| 2019–2026 | Chevrolet Silverado 1500 | 4x4 | All |
Not sure about your vehicle? Use the fitment checker above — it verifies your exact year, drive, and engine.
The transmission pan hangs low on the Silverado 1500 — and the catalytic converters right behind it are worth more to thieves than to you.
This plate shields the transmission and the catalytic converters on your 2019-2026 Silverado 1500. The factory leaves both nearly bare: one rock strike on the pan means a tow and a rebuilt transmission, and unprotected cats are a two-minute sawzall job in a parking lot. A stolen converter can run well past $1,000 with labor — this shield covers the cats against both trail impacts and theft.
Aluminum can't rust the way steel plates do — every scratch on steel armor is where corrosion starts, especially with road salt. Ours is 1/4" 5052 aluminum, powder-coated black, CNC plasma-cut and press-brake formed in our Wheat Ridge, Colorado shop.
Specs
✅ Will this fit your truck?
Fits 2019-2026 Chevrolet Silverado 1500 (same plate as our GMC Sierra 1500 listing).
⚠️ Will not fit vehicles with a 4"+ lift — aftermarket drop brackets and crossmembers interfere with factory mounting points.
🚚 Free shipping (lower 48). Ships next business day.
Not sure it fits yours? Text your year + trim to (970) 341-4221 and we'll confirm before you buy.
Pair it with the Engine and Transfer Case skids, or get the full Silverado 1500 Skid Plate Package.
✅ Will this fit your Silverado 1500?
Yes — this fits 2019–2026 Chevrolet Silverado 1500 (all cabs, all beds, 2WD and 4WD).
🚚 Ships next business day.
Not sure it fits yours? Text your year + trim to (970) 341-4221 and we'll confirm before you buy.
All orders ship from our Colorado facility the next business day. Standard delivery takes 2-4 business days via UPS Ground.
We offer a 90-day return policy on all products in unused, original condition. To initiate a return, contact us at (970) 341-4221 or email us. Return shipping is the responsibility of the buyer unless the product is defective.
Every Juggernaut USA skid plate is covered by our lifetime warranty against manufacturing defects. Our warranty covers materials and workmanship for the life of the product.
| What matters underbody | Our 1/4″ 5052-H32 aluminum | Typical 3/16″ steel |
|---|---|---|
| Resistance to permanent bending | Higher — bend resistance rises with the square of thickness | Baseline |
| Weight | About half — easier on payload | Heavier — a full set can top 120 lb |
| Corrosion | Won't rust | Rusts where the coating chips |
| Surface hardness (drag over rock) | Softer — can gouge on granite | Harder — steel's real edge |
Thickness does more work than material name: resistance to permanent bending scales with the square of plate thickness, so 1/4″ 5052-H32 aluminum takes a bigger hit before it stays bent than the 3/16″ steel most kits run — at about half the weight, and it never rusts. Steel’s honest advantage is surface hardness: if your truck lives on rock ledges, steel gouges less. For most owners, the thicker aluminum wins the trade.
Read the full aluminum vs. steel breakdown →Strong, lightweight, and looks good. I had to notch out the edges of the plate to fit so it wasn't a direct bolt on, but that could be because I have a 6" lift on the truck. It wasn't a big deal anyway.
Customers who bought this also added these
Common questions about our skid plates and armor
Yes — fits all 2019+ Silverado 1500 models, including the Trail Boss.
Yes — fits all engines.
Compatible with lift and leveling kits under 4". Kits 4" and taller require subframe drop brackets that interfere.
Underbody armor that shields your oil pan, transmission, catalytic converter, transfer case, and front differential from rocks, road debris, potholes, and trail impacts.
1/4" 5052-H32 aluminum, powder-coated black, with steel mounting brackets where needed — made in-house in Wheat Ridge, Colorado from US-sourced aluminum.
Aluminum is roughly half the weight of steel and won't rust — full-strength underbody protection without the weight penalty or corrosion of steel armor.
Negligibly — an aluminum set weighs about half what steel does, so the added weight is minimal.
Yes — potholes, road debris, and steep driveways damage undercarriages even off the trail. It's cheap insurance against expensive repairs.
No — every Juggernaut skid plate is 100% bolt-on to factory mounting points. No drilling, cutting, or welding.
Yes — bolt-on installation with basic hand tools. Step-by-step guides are on each product's install page.
Yes — our plates include oil-drain access cutouts so you can do routine oil changes without removing the skid plate.
No — the plates are designed to preserve factory airflow to coolers and components.
Minimal — plates contour to the frame and tuck up against the underbody so they slide over obstacles rather than hang low.
No — aluminum doesn't rust, and the black powder coat adds further corrosion resistance.
No — under the Magnuson-Moss Warranty Act, a bolt-on aftermarket part can't void your factory warranty on its own.
A lifetime warranty against manufacturing defects.
Made in the USA in Wheat Ridge, Colorado and shipped nationwide next business day. Use the year/make/model selector on any product page to confirm fit.
The transmission pan hangs low on the Silverado 1500 — and the catalytic converters right behind it are worth more to thieves than to you.
This plate shields the transmission and the catalytic converters on your 2019-2026 Silverado 1500. The factory leaves both nearly bare: one rock strike on the pan means a tow and a rebuilt transmission, and unprotected cats are a two-minute sawzall job in a parking lot. A stolen converter can run well past $1,000 with labor — this shield covers the cats against both trail impacts and theft.
Aluminum can't rust the way steel plates do — every scratch on steel armor is where corrosion starts, especially with road salt. Ours is 1/4" 5052 aluminum, powder-coated black, CNC plasma-cut and press-brake formed in our Wheat Ridge, Colorado shop.
Specs
✅ Will this fit your truck?
Fits 2019-2026 Chevrolet Silverado 1500 (same plate as our GMC Sierra 1500 listing).
⚠️ Will not fit vehicles with a 4"+ lift — aftermarket drop brackets and crossmembers interfere with factory mounting points.
🚚 Free shipping (lower 48). Ships next business day.
Not sure it fits yours? Text your year + trim to (970) 341-4221 and we'll confirm before you buy.
Pair it with the Engine and Transfer Case skids, or get the full Silverado 1500 Skid Plate Package.
Verified buyers · rendered live from Judge.me.
Strong, lightweight, and looks good. I had to notch out the edges of the plate to fit so it wasn't a direct bolt on, but that could be because I have a 6" lift on the truck. It wasn't a big deal anyway.
Popular fitment questions first, then everything else about ordering and install.