All Juggernaut USA skid plates are engineered for true bolt-on installation. No drilling, cutting, or welding is required.
Professional Installation
If you're in the Denver, Colorado area, our expert technicians can install this product for you. Our shop installs these every day at competitive rates, backed by a lifetime warranty on labor. Schedule your installation or call (970) 341-4221.
Not sure about your vehicle? Use the fitment checker above — it verifies your exact year, drive, and engine.
SCROLL DOWN FOR INSTALL GUIDE
All Generator skids now come with the stand-off kit. See installation instructions and product description photos to see if your generator requires the stand-off kit for installation.
After having a few customer come into our shop with damage on their low hanging rear generators, we came up with a 1/4" aluminum skid plate that will protect the generator from rocks, road debris and bottoming out on fire roads!
We have tested them on the Ram Winnebago Solis/Travato and Thor Sequence, but should fit any similarly mounted generator!
Includes hole for easy oil changes on the generator!
Works for generators that are lower or flush with the existing chassis mounts!
Easy bolt on installation that clamps to the factory generator mounting bracket. Just need to tighten 4 bolts!
Only adds 1/4" to the bottom of the generator!
Powder-coated black for rust and abrasion resistance!
Weighs around 20lbs!
Made in Denver, CO!
Feel free to text or call us with any questions at (970) 341-4221!
Not sure it fits yours? Text your year + trim to (970) 341-4221 and we'll confirm before you buy.
Shipping
All orders ship from our Colorado facility the next business day. Standard delivery takes 2-4 business days via UPS Ground.
Returns & Exchanges
We offer a 90-day return policy on all products in unused, original condition. To initiate a return, contact us at (970) 341-4221 or email us. Return shipping is the responsibility of the buyer unless the product is defective.
Limited Lifetime Manufacturer's Warranty
Every Juggernaut USA skid plate is covered by our limited lifetime manufacturer's warranty against manufacturing defects. Our warranty covers materials and workmanship for the life of the product.
Aluminum vs. steel — why we build in 1/4″ aluminum
Comparison of 1/4-inch 5052-H32 aluminum and typical 3/16-inch steel skid plates
What matters underbody
Our 1/4″ 5052-H32 aluminum
Typical 3/16″ steel
Resistance to permanent bending
Higher — bend resistance rises with the square of thickness
Baseline
Weight
About half — easier on payload
Heavier — a full set can top 120 lb
Corrosion
Won't rust
Rusts where the coating chips
Surface hardness (drag over rock)
Softer — can gouge on granite
Harder — steel's real edge
Thickness does more work than material name: resistance to permanent bending
scales with the square of plate thickness, so 1/4″ 5052-H32 aluminum
takes a bigger hit before it stays bent than the 3/16″ steel most kits run —
at about half the weight, and it never rusts. Steel’s honest advantage is
surface hardness: if your truck lives on rock ledges, steel gouges less. For
most owners, the thicker aluminum wins the trade.
“Just installed the new generator skid plate on my 2021 Jayco Swift camper van. Looks good and it definitely is going to protect it.”
Installed on a 2024 Jayco Swift. Appears to fit perfectly! Biggest initial problem was that there was no parts list or installation instructions anywhere in the shipping box!
Watched a YouTube install and did install while van was lifted for welding steel rollers to bottom of hitch mounting bracket .
The product is well made, the installation process is relatively straightforward and requires only a few standard tools. I’m an antique (over 70) and had no issues with the install. Recommend their products with no reservations.
Just installed the new generator skid plate on my 2021 Jayco Swift camper van. Looks good and it definitely is going to protect it.
COMPLETE YOUR PROTECTION
Customers who bought this also added these
FREQUENTLY ASKED QUESTIONS
Common questions about our skid plates and armor
What does this skid plate protect, and from what?
It protects the low-hanging Cummins Onan generator on Promaster-chassis RVs from road damage.
Which RVs does it fit?
Fits Winnebago Promaster-chassis RVs and select other builds depending on the year. For other brands and models not listed, contact us so we can confirm fitment.
What years does it fit?
Fits all years.
Can I still service the generator?
Yes — it includes oil-drain access for routine generator service.
What if my generator mounts don't have horizontal flanges at the bottom?
No problem — we include L brackets that adapt the skid plate to mount securely.
Is it engineer-approved?
Yes — approved by Cummins engineers.
What is a skid plate, and what does it protect?
Underbody armor that shields your oil pan, transmission, catalytic converter, transfer case, and front differential from rocks, road debris, potholes, and trail impacts.
What are Juggernaut skid plates made of?
1/4" 5052-H32 aluminum, powder-coated black, with steel mounting brackets where needed — made in-house in Wheat Ridge, Colorado from US-sourced aluminum.
Why aluminum instead of steel?
Aluminum is roughly half the weight of steel and won't rust — full-strength underbody protection without the weight penalty or corrosion of steel armor.
Will a skid plate hurt my gas mileage?
Negligibly — an aluminum set weighs about half what steel does, so the added weight is minimal.
Do I need one if I mostly drive on the street?
Yes — potholes, road debris, and steep driveways damage undercarriages even off the trail. It's cheap insurance against expensive repairs.
Do I have to drill or modify my vehicle to install it?
No — every Juggernaut skid plate is 100% bolt-on to factory mounting points. No drilling, cutting, or welding.
Can I install it myself?
Yes — bolt-on installation with basic hand tools. Step-by-step guides are on each product's install page.
Can I still change my oil with the skid plate installed?
Yes — our plates include oil-drain access cutouts so you can do routine oil changes without removing the skid plate.
Will it affect engine or transmission cooling?
No — the plates are designed to preserve factory airflow to coolers and components.
Will it reduce my ground clearance?
Minimal — plates contour to the frame and tuck up against the underbody so they slide over obstacles rather than hang low.
Will it rust or corrode?
No — aluminum doesn't rust, and the black powder coat adds further corrosion resistance.
Does adding a skid plate void my vehicle warranty?
No — under the Magnuson-Moss Warranty Act, a bolt-on aftermarket part can't void your factory warranty on its own.
What warranty do Juggernaut skid plates include?
A limited lifetime manufacturer's warranty against manufacturing defects.
Where are they made and how fast do they ship?
Made in the USA in Wheat Ridge, Colorado and shipped nationwide next business day. Use the year/make/model selector on any product page to confirm fit.
4.95/5 Stars623 Verified Customer Reviews
Limited Lifetime Manufacturer's WarrantyOn All Skid Plates & Armor
Made in USADesigned & Fabricated in Colorado
◈ Limited lifetime manufacturer's warranty⌕ Tap to zoom◫1 / 4
Year, make, model — we auto-pick the exact configuration for you.
✓ Guaranteed to fit — or we cover return shipping
✓ Ships next business day from Colorado
✓ Limited lifetime manufacturer's warranty, made in the USA
or choose options yourself
Matching your vehicle…
Enter your vehicle
We'll pick the exact plate — no options to guess.
Description
SCROLL DOWN FOR INSTALL GUIDE
All Generator skids now come with the stand-off kit. See installation instructions and product description photos to see if your generator requires the stand-off kit for installation.
After having a few customer come into our shop with damage on their low hanging rear generators, we came up with a 1/4" aluminum skid plate that will protect the generator from rocks, road debris and bottoming out on fire roads!
We have tested them on the Ram Winnebago Solis/Travato and Thor Sequence, but should fit any similarly mounted generator!
Includes hole for easy oil changes on the generator!
Works for generators that are lower or flush with the existing chassis mounts!
Easy bolt on installation that clamps to the factory generator mounting bracket. Just need to tighten 4 bolts!
Only adds 1/4" to the bottom of the generator!
Powder-coated black for rust and abrasion resistance!
Weighs around 20lbs!
Made in Denver, CO!
Feel free to text or call us with any questions at (970) 341-4221!
The product is well made, the installation process is relatively straightforward and requires only a few standard tools. I’m an antique (over 70) and had no issues with the install. Recommend their products with no reservations.
Installed on a 2024 Jayco Swift. Appears to fit perfectly! Biggest initial problem was that there was no parts list or installation instructions anywhere in the shipping box!
Watched a YouTube install and did install while van was lifted for welding steel rollers to bottom of hitch mounting bracket .
Installation guide
Moderate
1
Remove the factory hardware it replaces — bolt-out, no cutting or trimming.
2
Hand-thread every bolt into the factory mount points before tightening any.
3
Torque to spec. Bolt-on, no drilling — see the full guide for exact hardware and torque values.
Made in-house in Wheat Ridge, Colorado · Limited lifetime manufacturer's warranty
Vehicle fitment
2014–2027 Ram ProMaster 1500
DriveFWD
Engine3.6L Gas
2014–2027 Ram ProMaster 2500
DriveFWD
Engine3.6L Gas
2014–2027 Ram ProMaster 3500
DriveFWD
Engine3.6L Gas
Not certain? Use the FIT tab above — it confirms the exact fit from your year, make, model and engine.
Frequently asked
Popular fitment questions first, then everything else about ordering and install.
Popular — does it fit & work?
Confirm fitment for your exact vehicle
Use the FIT tab at the top — every year, drive, engine and air-dam combo maps to the correct plate. Guaranteed to fit or we cover return shipping.
Not sure if your truck has an active air dam?
Most 2021+ trucks came with the active (lowering) air dam. The FIT tab asks for it and picks the matching plate either way — if you're unsure, text your VIN or trim to us and we'll confirm before you buy.
Does it fit the PowerBoost hybrid & lifted trucks?
Yes — select your engine in the FIT tab (PowerBoost has its own plate). Bolts to factory mount points, so leveling kits and lifts are no issue.
Does it change ground clearance?
It mounts flush to the factory crossmembers, so any change is minimal — you gain protection without meaningfully lowering the truck.
Will it affect cooling or airflow?
No. The plates are cut with airflow and oil-drain access in mind, so engine and transmission cooling are unaffected.
Ordering & install
Will this fit my vehicle?
Use the vehicle selector above to verify fitment. All our products are designed for specific year, make, and model configurations. If your vehicle isn't listed, contact us — we may be able to help.
How long does installation take?
Every plate is bolt-on with basic hand tools — no drilling, cutting, or welding. Detailed instructions ship with every order, and most products have a step-by-step guide and install video on their page.
Can I install this myself or do I need a shop?
All our products are designed for at-home installation with basic tools (wrenches, ratchets, jack stands). If you're near Denver, our Wheat Ridge shop offers professional installation — call (970) 341-4221 to schedule.
How long does shipping take?
Orders ship from our Colorado facility the next business day. Standard ground delivery takes 2–4 business days depending on your location. Oversized items ship via freight carrier with tracking.
