The 2020–2026 Ford Super Duty Fuel Tank Skid Plate guards the exposed fuel tank on F-250 and F-350 trucks from rocks, ice chunks, and road debris that can puncture or dent it.
What it protects: the fuel tank — large, low, and unprotected from the factory.
Looking for full underbody coverage? See the Super Duty Skid Plate Package.
✅ Will this fit your Super Duty?
Yes — this fits 2020–2026 Ford F-250 / F-350 Super Duty (all cabs, all beds, 2WD and 4WD).
🚚 Ships next business day.
Not sure it fits yours? Text your year + trim to (970) 341-4221 and we'll confirm before you buy.
| Brand | Juggernaut USA |
| Product Type | Skid Plate |
| SKU | jg-superduty-fuel-sb-diesel-skid-blk |
| Material | 1/4-inch 5052-H32 Aluminum |
| Hardware | Grade 8 stainless steel (included) |
| Weight | 50.0 lb |
| Warranty | Lifetime Warranty |
| Country of Origin | Made in USA (Colorado) |
| Installation | Bolt-on, no drilling required |
All Juggernaut USA skid plates are engineered for true bolt-on installation. No drilling, cutting, or welding is required. Most installations can be completed in 1-2 hours with basic hand tools.
If you're in the Denver, Colorado area, our expert technicians can install this product for you. We've completed over 500 custom builds and offer competitive installation rates. Schedule your installation or call (970) 341-4221.
All orders ship from our Colorado facility the next business day. Standard delivery takes 2-4 business days via UPS or FedEx Ground.
We offer a 30-day return policy on all products in unused, original condition. To initiate a return, contact us at (970) 341-4221 or email us. Return shipping is the responsibility of the buyer unless the product is defective.
Every Juggernaut USA skid plate is covered by our lifetime warranty against manufacturing defects. Our warranty covers materials and workmanship for the life of the product.
The skid plate for my 2022 F350 fit perfectly and was easy to install. Its a very sturdy plate secured with good hardware, I believe its gonna do the job, or at least give me piece of mind that I won't end up with a hole in my oil pan/filter.
If this is anything like the engine/trans plate, it should be perfect. If it’s not 5 stars, I updated my review… will install in spring when it’s not 0f outside.
Customers who bought this also added these
Common questions about our skid plates and armor
Yes — with oil-filter access for the 6.7L diesel, the 7.3L gas, and the smaller 6.8L V8 gas engine.
Yes — and it works alongside the factory Tremor transfer-case skid plate.
Yes — our fuel tank skid replaces the factory fiberglass skid with aluminum, mounted to the frame instead of the tank.
Yes — fits F250, F350, F450, and F550.
Underbody armor that shields your oil pan, transmission, catalytic converter, transfer case, and front differential from rocks, road debris, potholes, and trail impacts.
1/4" 5052-H32 aluminum, powder-coated black, with steel mounting brackets where needed — made in-house in Wheat Ridge, Colorado from US-sourced aluminum.
Aluminum is roughly half the weight of steel and won't rust — full-strength underbody protection without the weight penalty or corrosion of steel armor.
Negligibly — an aluminum set weighs about half what steel does, so the added weight is minimal.
Yes — potholes, road debris, and steep driveways damage undercarriages even off the trail. It's cheap insurance against expensive repairs.
No — every Juggernaut skid plate is 100% bolt-on to factory mounting points. No drilling, cutting, or welding.
Yes — bolt-on installation with basic hand tools, usually about 1–2 hours. Step-by-step guides are on each product's install page.
Yes — our plates include oil-drain access cutouts so you can do routine oil changes without removing the skid plate.
No — the plates are designed to preserve factory airflow to coolers and components.
Minimal — plates contour to the frame and tuck up against the underbody so they slide over obstacles rather than hang low.
No — aluminum doesn't rust, and the black powder coat adds further corrosion resistance.
No — under the Magnuson-Moss Warranty Act, a bolt-on aftermarket part can't void your factory warranty on its own.
A lifetime warranty against manufacturing defects.
Made in the USA in Wheat Ridge, Colorado and shipped nationwide next business day. Use the year/make/model selector on any product page to confirm fit.