DENVER'S 4X4 & OFF-ROAD SHOP
Juggernaut USA is the Denver off-road shop with its own manufacturing floor — lift kits, leveling kits, bumpers, armor, wheels, and van builds, installed right the first time. Backed by a lifetime labor warranty.
The 4x4 store that installs everything it sells
However you found us — searching for an off-road shop in Denver, a 4x4 store, or 4 wheel parts for a Colorado build — the answer is the same building: a manufacturer that cuts, welds, and powder-coats its own aluminum armor, with a full install bay attached. We install everything we sell.
— Install menu
Services by Vehicle
Make, then model — every model links straight to its install page.
— Install menu
Services by Type
Know the job already? Go straight to the service page and get a quote.
— Authorized installer
Authorized Brand Installers
Authorized means the manufacturer's warranty holds on what we install — and we can help you choose between them.
Made in Wheat Ridge
We Build Rigs — and We Manufacture Our Own Armor
We're a manufacturer with a full install shop attached. Our 1/4-inch aluminum skid plates are CNC plasma-cut, press-braked, MIG-welded, and powder-coated in Wheat Ridge — then installed in the same building, by the same people.
No other Denver 4x4 shop makes what it installs. If a plate needs a tweak to fit your build, the person who cut it is thirty feet from your truck.
Honest numbers
What Does It Cost?
Honest starting points. Every build is different — these are floor prices, not package prices. We quote every job individually so you know exactly what you're getting before we touch anything.
Prices shown are minimum estimates based on current parts and labor rates. Final quotes depend on your specific vehicle, chosen brands, current setup, and labor complexity. We'll give you a real number before we touch anything.
How it works
Your Specs, No Guesswork
Four steps. No surprises. No parts we can't stand behind.
Daily driver, tow rig, hunting truck, ski-weekend hauler, or full overland build — we design around real use, not internet photos.
Based on your goals and budget, we recommend brands and components that work together and won't wreck your ride quality.
Our technicians handle the install, torque checks, and test drive. Clean wiring, correct geometry, zero shortcuts.
You leave with a vehicle that sits right, drives straight, and has the clearance and protection you paid for. Backed by lifetime labor warranty.
From the bay
How a Build Actually Goes Here
A parts list doesn't make a build. The difference is in the corrections — the work that decides whether the truck drives right at 75 mph, not just whether it sits taller in the parking lot. On every suspension job in our bay:
Why Juggernaut USA
Why Customers Drive From Across Colorado to Get This Done Here
We don't bolt on what's cheap or trendy. Every part is chosen for your actual vehicle, tire size, and use case. We'll tell you if something doesn't make sense.
Our installs run real miles — I-70 passes, Moab, mountain dirt. If it doesn't hold up here, we don't recommend it.
If your plan is overkill, risky, or a waste of money, we'll say so. That's how we get repeat customers.
Clean wiring, torqued hardware, labeled connectors. The next mechanic to touch your rig won't be cursing us.
Common questions
Install FAQ
What do you need from me to put together a quote?
Year, make, model, current tire size, current setup, what you want to change, and how you actually use the vehicle. If you already have parts in mind — or sitting in your garage — include that too.
Can you install parts I already bought?
Usually yes, as long as they're quality parts that make sense for your setup. Send us the brand, part numbers and where you bought them. If we think they'll cause problems, we'll tell you before you're on the schedule.
How far out are you booking installs?
It moves with the season, but expect 1–3 weeks once parts are in hand. If you've got a specific trip date, tell us up front so we can be realistic about timing.
Do you handle alignment after the install?
We make sure everything is torqued, cycled and driving correctly, and we'll point you at alignment shops we trust if it's needed after the install. For leveling kits, we build alignment into the quote.
What vehicles do you work on?
Jeep Wrangler (JK & JL), Jeep Gladiator, Ford F-150, Ford Super Duty, Ford Bronco, RAM 1500, RAM 2500/3500, Chevy Silverado, GMC Sierra, Toyota Tacoma, Toyota 4Runner, Toyota Tundra, Mercedes Sprinter, Ford Transit, RAM ProMaster, and Nissan NV.
Do you only do off-road builds?
No — we also build tow rigs, work trucks and vans that just need to be safer and more capable on the road. If it involves suspension, armor, or accessories, we're interested.
Ready to Stop Researching and Start Building?
Call, text, or send a quote request. We respond within one business day — usually same day.
Denver Metro & Front Range
Our shop is in Wheat Ridge — right off I-70 between Denver and Golden. Customers come to us from across the metro and out of state. We ship parts nationwide.
Get directions & hours →
4x4 & Off-Road Shop in Wheat Ridge — Serving Denver & the Front Range
Juggernaut USA is Denver's off-road shop and 4x4 store, located in Wheat Ridge, Colorado. Whether you found us searching for a 4x4 shop in Denver, 4 wheel parts, or an off-road store near you, the answer is the same building: a manufacturer that CNC-cuts, MIG-welds, and powder-coats its own aluminum armor, with a full install bay attached. We install lift kits, leveling kits, bumpers, skid plates, wheels and tires, suspension upgrades, and van builds for Colorado 4x4 owners across Wheat Ridge, Lakewood, Denver, Arvada, Golden, Westminster, Thornton, Boulder, Colorado Springs, and Fort Collins. 4840 Van Gordon St, Unit #300, Wheat Ridge, CO 80033 — call or text (970) 341-4221.